We’ve upgraded Alisouq for a faster, smoother experience
ALI SOUQ PORTAL L.L.C
Registered Address: 600 Al Wasl Road, Jumeirah 3, Dubai, UAE
Customer Support: +971 54 306 4845
Email: customerservice@alisouq.com
Top Categories
Customer Service
We’ve upgraded Alisouq for a faster, smoother experience
Registered Address: 600 Al Wasl Road, Jumeirah 3, Dubai, UAE
Customer Support: +971 54 306 4845
Email: customerservice@alisouq.com
(incl. VAT)
1–3 business days (Dubai) | 3–5 business days (Other Emirates)
14-day returns (conditions apply)
loading...
The rubber parts remain supple, thereby increasing their service life and preventing cracks Freezing and drying out is prevented effectively in winter Eliminates squeaking and creaking noises Silicone-free Resistant to splash water and salt water Biodegradable Resistant to diluted acids and bases Water-resistant Notice Use of the product on acrylic glass (PMMA) may result in stress cracks. Keep away from sources of ignition and do not smoke. In case of contact with eyes, flush thoroughly with water and contact a physician immediately. Only use in well-ventilated areas. The usage instructions are recommendations based on the tests we have conducted and based on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Rubber Fit rubber care Silicone-free care for rubber seals Contents: 75 ml Smell/fragrance: Characteristic Chemical basis: Hydrocarbon Colour: Colourless Density/conditions: 0.77 g/cm / at 20C Min. flashing point: 64 C Bio-degradable: Yes Silicone-free: Yes
The rubber parts remain supple, thereby increasing their service life and preventing cracks Freezing and drying out is prevented effectively in winter Eliminates squeaking and creaking noises Silicone-free Resistant to splash water and salt water Biodegradable Resistant to diluted acids and bases Water-resistant Notice Use of the product on acrylic glass (PMMA) may result in stress cracks. Keep away from sources of ignition and do not smoke. In case of contact with eyes, flush thoroughly with water and contact a physician immediately. Only use in well-ventilated areas. The usage instructions are recommendations based on the tests we have conducted and based on our experience, carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
